Brother International CS-6000/6000b/6000t/6000i Operation Manual - Page 36

Zipper Insertion

Get Brother International CS-6000/6000b/6000t/6000i PDF manuals and user guides View all Brother International CS-6000/6000b/6000t/6000i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

UTILITY STITCHES Pull the upper thread at the end of the stitching j to the wrong side of the fabric, and then tie it with the bobbin thread. Use scissors to cut the upper thread and the bobbin thread at the beginning of the stitching. When you are finished attaching the button, k slide the feed dog position lever to to raise the feed dogs. ZIPPER INSERTION You can use the zipper foot to sew different types of zippers, and can easily position it to the right or left side of the needle. When sewing the right side of the zipper, attach the shank to the left pin of the zipper foot. When sewing the left side of the zipper, attach the shank to the right pin of the zipper foot. Stitch Name Pattern No. Pattern Presser Foot 70 stitches model 60 stitches model 50 stitches model 40 stitches model Straight stitch (center) I 01 01 01 01 1 2 a Zipper foot b Right pin for sewing the left side of the zipper c Left pin for sewing the 3 right side of the zipper Select stitch . a Lower the presser foot lever and fix either the b left or right pin of the zipper foot onto the shank. Fold the edge of the material 2 cm (3/4 inch) c and place the zipper under the folded section. Lower the needle into the notch located either on the left or right side of the zipper foot. CAUTION ● Turn the handwheel by hand to make sure the needle does not hit the presser foot before you start sewing. If you choose a different stitch, the needle will hit the presser foot and break the needle. You may also be injured. Sew from the bottom of the zipper toward the d top on both sides. The needle should be positioned on the zipper side of the foot for best results. To sew the opposite side of the zipper, release e the foot by pressing the button located at the back of the presser foot, fit the zipper foot on the other side of the zipper and continue sewing using the other side notch. CAUTION ● Make sure the needle does not hit the zipper during sewing. If the needle hits the zipper, the needle may break and you may be injured. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
34
UTILITY STITCHES
j
Pull the upper thread at the end of the stitching
to the wrong side of the fabric, and then tie it
with the bobbin thread.
Use scissors to cut the upper thread and the
bobbin thread at the beginning of the stitching.
k
When you are finished attaching the button,
slide the feed dog position lever to
to raise
the feed dogs.
You can use the zipper foot to sew different types of
zippers, and can easily position it to the right or left
side of the needle.
When sewing the right side of the zipper, attach the
shank to the left pin of the zipper foot. When sewing
the left side of the zipper, attach the shank to the right
pin of the zipper foot.
a
Select stitch
.
b
Lower the presser foot lever and fix either the
left or right pin of the zipper foot onto the
shank.
c
Fold the edge of the material 2 cm (3/4 inch)
and place the zipper under the folded section.
Lower the needle into the notch located either
on the left or right side of the zipper foot.
d
Sew from the bottom of the zipper toward the
top on both sides. The needle should be
positioned on the zipper side of the foot for best
results.
e
To sew the opposite side of the zipper, release
the foot by pressing the button located at the
back of the presser foot, fit the zipper foot on
the other side of the zipper and continue sewing
using the other side notch.
ZIPPER INSERTION
Stitch Name
Pattern
Presser Foot
Pattern No.
70 stitches
model
60 stitches
model
50 stitches
model
40 stitches
model
Straight
stitch
(center)
I
01
01
01
01
1
2
3
a
Zipper foot
b
Right pin for sewing
the left side of the
zipper
c
Left pin for sewing the
right side of the zipper
CAUTION
●
Turn the handwheel by hand to make sure the
needle does not hit the presser foot before you
start sewing. If you choose a different stitch, the
needle will hit the presser foot and break the
needle. You may also be injured.
CAUTION
●
Make sure the needle does not hit the zipper
during sewing. If the needle hits the zipper, the
needle may break and you may be injured.