Brother International CT-1500 Owners Manual - English - Page 6

OPERATING INSTRUCTIONS HOW TO ATTACH THE HANDLE TO VACUUM CLEANER 1 First remove the handle screw. Then insert the base of the handle into the top of the body of the vacuum cleaner as shown. (Fig. 1) Make sure the ON/OFF switch on the handle is Handle positioned to the front of the vacuum cleaner. 2 Line up the small hole on the handle with the small hole on the rear of the vacuum cleaner and insert the screw. (Fig. 2) Be sure the screw is tightened securely. Handle screw Handle Note: Unit should be unplugged and power switch in the "OFF" position. Handle screw Fig.1 Fig.2 HOW TO WIND POWER CORD 1 Insert the power cord in the clip located on the upper cord storage hook as shown. (Fig. 3) Clip Plug Side Fig.3 2 Wrap excess cord around the cord storage hooks to prevent dragging and any interference with cleaning. (Fig. 4) Upper cord storage hook Fig.4 HOW TO RELEASE POWER CORD Rotate the upper cord storage hook downward for quick cord release. (Fig. 5) Upper cord storage hook Fig.5 6