Brother International HL-2460N Users Manual - English - Page 147
Reconnect the interface cable from your computer., Install the side cover.
UPC - 012502600787
View all Brother International HL-2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
☛ 6. CHAPTER 4 OPTIONS Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM snap inward into place.(To remove a DIMM, the locks must be released.) Fig. 4-13 ☛ 7. Secure the metal plate with the three screws in the order shown. z y x Fig. 4-14 ☛ 8. Install the side cover. ☛ 9. Reconnect the interface cable from your computer. Plug the power cord into the AC outlet, and then turn on the printer. ☛ 10. To check whether the DIMM has been installed correctly, you can print a Test page "Print Configuration" that will print the current memory size. To print a "Configuration page," see Chapter 3. 4-15
CHAPTER 4 OPTIONS
4–15
☛
6.
Press the DIMM straight into the slot (press firmly). Make sure the locks on
each side of the DIMM snap inward into place. (To remove a DIMM, the
locks must be released.)
Fig. 4-13
☛
7.
Secure the metal plate with the three screws in the order shown.
Fig. 4-14
☛
8.
Install the side cover.
☛
9.
Reconnect the interface cable from your computer.
Plug the power cord into the AC outlet, and then turn on the printer.
☛
10.
To check whether the DIMM has been installed correctly, you
can print a
Test page “Print Configuration” that will print the current memory size.
To
print a “Configuration page,” see Chapter 3.
①
③
②