Brother International HL-2460N Users Manual - English - Page 194
How to print correctly, The printer prints unexpectedly, or it prints garbage. - windows 7 driver
UPC - 012502600787
View all Brother International HL-2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
How to print correctly CHAPTER 6 TROUBLESHOOTING PPrroobblleemm The printer prints unexpectedly or it prints garbage. RReeccoommmmeennddaattiioonn • Make sure the printer cable is not too long. We recommend that you use a parallel cable of less than 2 metres (6.6 feet) in length. • Check if the printer cable is damaged or broken. • If you are using an interface-switching device, remove it and then connect your computer directly to your printer and try again. • Check that the appropriate printer driver is selected as 'Set as Default'. • Check that the printer is not connected to the same port that is also connected to a mass storage device or scanner. Remove all other devices and then connect the port only to the printer. • Turn off printer status reporting in the Device/Options tab in the printer driver. The printer cannot print full pages of a document. • Press the Go switch to print the data remaining in the printer. • If this does not clear the error, reduce the complexity of your document or reduce the print resolution. • Change the following settings in the supplied Windows® driver, and then try again. The best combination of the settings below will vary depending on your document. • Graphics Mode • TrueTypeTM mode • Use Printer TrueTypeTM Fonts The printer cannot print full pages of a document. A "MEMORY FULL" error message occurs. • Press the panel button to print the data remaining in the printer. • Reduce the print resolution or reduce the complexity of your document. • Expand the printer memory by adding a commercially available DIMM. See 'RAM expansion' in Chapter 4. 6-29