Brother International HL-2460N Users Manual - English - Page 238
Bar Code, Expanded Character, Line Block Drawing & Box Drawing
UPC - 012502600787
View all Brother International HL-2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
APPENDIX ♦ Bar Code, Expanded Character, Line Block Drawing & Box Drawing Offset in X-axis n = "xnnn" or "Xnnn" This parameter specifies the offset from the left margin in the "u"- or "U"specified unit. ♦ Bar Code & Expanded Character Offset in Y-axis n = "ynnn" or "Ynnn" This parameter specifies the downward offset from the current print position in the "u"- or "U"-specified unit. ♦ Bar Code, Expanded Character, Line Block Drawing & Box Drawing Height n = "hnnn", "Hnnn", "dnnn", or "Dnnn" (1) EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-A), ISBN (UPC-E): 22 mm (2) UPC-E: 18 mm (3) Others: 12 mm Expanded characters © 2.2 mm (default) Line Block Drawing & Box Drawing © 1 dot This parameter specifies the height of bar codes or expanded characters as above. It can take the prefix "h", "H", "d", or "D". The height of bar codes is specified in the "u"- or "U"-specified unit. Note that the default setting of the bar code height (12 mm, 18 mm or 22 mm) is subject to the bar code mode selected by "t" or "T". ♦ Expanded Character Width, Line Block Drawing & Box Drawing n = "wnnn" or "Wnnn" Expanded character © 1.2 mm Line Block Drawing & Box Drawing © 1 dot This parameter specifies the width of expanded characters as above. Appendix-39