Brother International HL-5255DN-MICR MICR Network Owner's Manual - English - Page 49
Troubleshooting, Overview, General problems, CD-ROM is inserted, but does not start automatically
View all Brother International HL-5255DN-MICR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
8 Troubleshooting Overview This chapter describes procedures for troubleshooting problems you may encounter with a Brother print 8 server, it is divided into the following sections: ■ General problems ■ Network print software installation problems ■ Printing problems ■ Protocol-specific troubleshooting General problems CD-ROM is inserted, but does not start automatically If your computer does not support Autorun, the menu will not start automatically after inserting the CD-ROM. In this case, execute Start.exe in the root directory of the CD-ROM. How to reset the Brother print server to factory default You can reset the print server back to its default factory settings (resetting all information such as the password and IP address information). See Restoring the network settings to factory default on page 7-7. Installation problems The Brother print server is not found during setup of the network print software installation or from the printer driver of the Brother printer in Windows®. The Brother print server is not found using the Simple Network Configuration capabilities of Mac OS® X. Make sure you have completed the IP address setting of the Brother print server according to Chapter 2 of this User's Guide before installing the network print software or printer driver. Check the following: 1 Make sure that the printer is powered on, is on-line and ready to print. 8 - 1