Brother International HL-6050DN Network Users Manual - English - Page 80
Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG
UPC - 012502609568
View all Brother International HL-6050DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
■ Service is the name of the service assigned by NetWare print server name (where the default services are BRN_xxxxxx_P1 for the Brother printer, where xxxxxx is the last six digits of the Ethernet address (MAC address)). ■ You can also enter the TREE and CONTEXT name using your web browser, by connecting to the Brother print server using the TCP/IP protocol and selecting the NetWare protocol configuration. 22 Use the BRCONFIG command or TELNET command: SET NETWARE RESCAN to force the print server to rescan for file servers, or power cycle the printer. The same service assigned by NetWare print server cannot be used for both queue server mode and remote printer mode. If you want to enable remote printer capabilities on a service other than the default NetWare service, you must define new services that are enabled for NetWare and for the desired port. Refer to Appendix in this manual for information on how to do this. Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG 1 Make sure that the PSERVER NLM (NetWare Loadable Module) is loaded on your file server. 2 Log into the file server from your PC workstation as ADMIN if you are using NetWare 4.1x (if you want NDS support, do not login under bindery mode). If you are using NetWare 2.xx or 3.xx, login as SUPERVISOR. 3 Run the PCONSOLE utility from your PC workstation. 4 If you are creating a new print queue, select Print Queue Information (NetWare 3.xx) or Print Queues (NetWare 4.1x) from the Available Options menu. NOVELL NETWARE PRINTING 6 - 18