Brother International HL-6050DN Network Users Manual - English - Page 83
Novell Netware Printing, Set Netware Nprinter Brother1ps 3 On Brn_310107_p1
UPC - 012502609568
View all Brother International HL-6050DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
b Select the Brother print server from the list of print servers. When you get the message that the print server is connected, press the ENTER key and type the default password access in response to the # prompt (the password will not echo) and then press the ENTER key again in response to the Enter Username> prompt. When you get the Local> prompt, type: SET NETWARE NPRINTER nlm number ON service SET NETWARE RESCAN EXIT ■ Where nlm is the name of the PSERVER NLM on your file server. ■ Number is the printer number (this must match the printer number you selected during the PCONSOLE configuration in the previous steps). ■ Service is the name of the service assigned by NetWare print server name (where the default services are BRN_xxxxxx_P1 for the Brother printer, where xxxxxx is the last six digits of the Ethernet address (MAC address)). For example, to set up remote "Printer 3" for a Brother printer with the print server BRN_310107_P1 using the PSERVER NLM called BROTHER1PS, you would type: SET NETWARE NPRINTER BROTHER1PS 3 ON BRN_310107_P1 SET NETWARE RESCAN EXIT ■ You can also enter the remote printer name using your web browser, by connecting to the Brother print server using the TCP/ IP protocol and selecting the NetWare protocol configuration. The same services assigned by NetWare print server name cannot be used for both queue server mode and remote printer mode. You must now unload the PSERVER NLM from your NetWare file server console and then reload it in order for the changes to take effect. 6 - 21 NOVELL NETWARE PRINTING