Brother International HL-660 Users Manual - English - Page 42
guide rails., Install the main controller board into the printer by sliding it into
View all Brother International HL-660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
English USER'S GUIDE 3 Unpack the SIMM and hold it on its edge. Note Do not touch the memory chips and the surface of the main controller board. If static electricity collects, it damages the memory. 4 Install the size of SIMM as you need into the slot and push gently until it clicks into place. Fig. 4-5 Install the SIMM 5 Install the main controller board into the printer by sliding it into the guide rails. 6 Secure the main controller board with the three screws. 7 Reconnect the interface cable from your computer and plug the power cord into the AC outlet. 4-6
USER’S GUIDE
4–6
English
3
Unpack the SIMM and hold it on its edge.
Note
Do not touch the memory chips and the surface of the main controller
board.
If static electricity collects,
it damages the memory.
4
Install the size of SIMM as you need into the slot and push gently
until it clicks into place.
Fig. 4-5 Install the SIMM
5
Install the main controller board into the printer by sliding it into the
guide rails.
6
Secure the main controller board with the three screws.
7
Reconnect the interface cable from your computer and plug the power
cord into the AC outlet.