Brother International HL-660 Users Manual - English - Page 66
Setting up the Printer for Windows, selections : HP LaserJet 4, Epson FX-850,
View all Brother International HL-660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
English USER'S GUIDE Questions Recommendation The printer prints, but it This is an indication that your application printer prints incorrect emulation setting and the printer's emulation do information. Sometimes it not match. Check in your application software to prints a couple of see which printer you have selected and to make characters and then ejects sure the printer is set up correctly. Remember this the page, etc. printer emulates three widely used printer selections : HP LaserJet 4, Epson FX-850, and IBM Proprinter XL. A suggestion is to reset the printer to factory settings by using the RESET switch or by using the RPC to set the printer into HP emulation and then select the HP LaserJet 4 printer in your application software. The printer does not print Press the SELECT switch to turn the printer off- when I press the Print line and press the FF/CONT switch. The data has Screen Key. been sent to the printer but the printer did not (DATA lamp On) receive the Page Eject command (print screens do not send this command.) The printer prints the first This was a common problem with database part of my document but software and spreadsheet software when not doesn't print the last page. correctly set up. The data has been sent to the (DATA lamp On) printer but the printer did not receive the Page Eject command. Press the SELECT switch to turn the printer off-line and press the FF/CONT switch to eject the page. Then check with your software supplier on how to add a Page Eject ( or Form Feed) command to the end of your print job. How can I change the User Use the remote printer console (RPC) program. settings or default settings of the printer? Setting up the Printer for Windows Questions The printer does not work. Recommendation Check the followings: • The printer is plugged in. • The interface cable is securely connected between the printer and computer. • There are no alarm conditions (blinking lamps.) 6-8