Brother International HL-665 Users Manual - English - Page 40

example if you have previously increased your memory from the standard, 72 mm 1.8 or less

Get Brother International HL-665 PDF manuals and user guides View all Brother International HL-665 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

English USER'S GUIDE This printer can accept the following types of SIMMs; Speed Pin Type Height Output 60 nsec - 80 nsec 72 pin 45.72 mm (1.8") or less 32 bit or 36 bit  Note The printer has only one slot for SIMM, therefore if you want to increase your printer memory again after you have installed a SIMM module into the slot, you will need to remove the previously installed SIMM first. For example if you have previously increased your memory from the standard 2MB to 4 MB by adding a 2MB SIMM and you wish to increase your total memory to 6MB, you need to remove the installed 2MB SIMM and install the new 4MB SIMM into the printer. 4-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
USER’S GUIDE
4–4
English
This printer can accept the following types of SIMMs;
Speed
60 nsec - 80 nsec
Pin Type
72 pin
Height
45.72 mm (1.8") or less
Output
32 bit or 36 bit
Note
The printer has only one slot for SIMM, therefore if you want to increase
your printer memory again after you have installed a SIMM module into
the slot, you will need to remove the previously installed SIMM first.
For
example if you have previously increased your memory from the standard
2MB to 4 MB by adding a 2MB SIMM and you wish to increase your
total memory to 6MB, you need to remove the installed 2MB SIMM and
install the new 4MB SIMM into the printer.