Brother International HL-665 Users Manual - English - Page 60
User Printer TrueType™ Fonts, Graphics Mode
View all Brother International HL-665 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
English USER'S GUIDE For errors shown below, the printer indicates an operator call by blinking the ALARM lamp and printing the error messages on paper. Error Memory Full Print Overrun Centronics Interface Line Error Action • Press the FF/CONT switch to print the data remaining in the printer. • If you are using the supplied Windows driver, try again after changing the following settings. The best combination of the settings below varies depending on your document. Graphics Mode TrueType mode User Printer TrueType™ Fonts Page Protection • Expand the printer memory by adding a commercially available SIMM. • Reduce the print resolution or reduce the complexity of your document. • Press the FF/CONT switch to print the data remaining in the printer. • If you use the supplied Windows driver, try again after changing the following settings. The best combination of the settings below varies depending on your document. Graphics Mode TrueType mode User Printer TrueType™ Fonts Page Protection • If this does not clear the error, reduce the complexity of your document or reduce the print resolution. • Expand the printer memory by installing SIMM and set page protection ON by using the supplied Windows driver or RPC program. • Press the FF/CONT switch to resume printing. • Check that the connection between your computer and printer is secure and correct, and check the interface cable. Note If the printer does not operate as you expect it to, it is recommended that you perform a user reset or factory reset with the switches or unplug the printer, wait a few seconds and then plug it in again. If you still have problems, consult your dealer or our authorized service representative. 6-2