Brother International HL-665 Users Manual - English - Page 68
Paper Handling, Questions, Recommendations
View all Brother International HL-665 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
English USER'S GUIDE Questions I cannot print from my application software. Recommendations • Check the PORT selection within the Chooser : it should match the port you physically attached the printer cable to. • Check the printer cable type (you should be using a Local-Talk type cable.) Paper Handling Questions The printer does not load paper. The printer does not load paper from the manual feed slot. How can I load envelopes? What paper can I use? How can I clear paper jams? Recommendations • Note if the ALARM and PAPER lamps are blinking. If so, the multi-purpose sheet feeder is out of paper. Load a new stack of paper into the feeder. • If there is paper in the multi-purpose sheet feeder, make sure it is straight. If the paper is curled, you should straighten it before printing. • Reduce the stack of paper in the multipurpose sheet feeder, then try again. When the MANUAL lamp is blinking, press the FF/CONT switch for manual loading. Re-insert the paper firmly. You can load envelopes from either the multipurpose sheet feeder or the manual feed slot. Your application software must be set up correctly to print on the envelope size you are using. This is usually done in the page setup or document setup menu of your software. Refer to your application manual. You can use plain paper, envelopes, transparencies, labels, and organizer paper. For information on loading paper, see "Paper Handling" in Chapter 2. See "PAPER JAMS" in this chapter. 6-10