Brother International HL-L2300D Command Reference Guide for Software Developer - Page 305
Line Spacing
View all Brother International HL-L2300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
Cancel perforation skip EscO (27)(79) This command cancels the automatic perforation skip feature. LPRINT CHR$(27); CHR$(79); 'Cancel perforation skip. 6.3. Line Spacing Select 1/6" line spacing Esc2 (27)(50) This command sets the line spacing to 1/6". All subsequent line feed operations will move the print position 1/6" down the page. This line spacing is the default setting when the printer is switched on or reset. LPRINT CHR$(27); CHR$(50); 'Set line spacing to 1/6". Select 1/8" line spacing Esc0 (27)(48) This command sets the line spacing to 1/8". All subsequent line feed operations will move the print position 1/8" down the page. LPRINT CHR$(27); CHR$(48); 'Set line spacing to 1/8". Select 7/72" line spacing Esc1 (27)(49) This command sets the line spacing to 7/72". All subsequent line feed operations will move the print position 7/72" down the page. Since the printer resolution is 600 dots per inch the line spacing will not be exactly 7/72". LPRINT CHR$(27); CHR$(49); 'Set line spacing to 7/72". Select n/72" line spacing EscAn (27)(65)n n This command sets the line spacing to n/72". All subsequent line feed operations will move the print position n/72" down the page. Since the printer's resolution is 600 dots per inch the line spacing will not be exactly n/72". n must be in the range 1 to 85. If n is outside the range 1 to 85 the default line spacing, 1/6" is selected. LPRINT CHR$(27); CHR$(65); CHR$(10); 'Set line spacing of 10/72". Select n/216" line spacing Esc3n (27)(51)n n This command sets the line spacing to n/216". All subsequent line feed operations will move the print position n/216" down the page. Since the printer's resolution is 600 dots per inch the line spacing will not be exactly n/216". n must be in the range 1 to 255. LPRINT CHR$(27); CHR$(51); CHR$(25); 'Select line spacing of 25/216". Perform n/216" line feed EscJn (27)(74)n n This command performs a single line feed, moving the print position down the page by n/216". This command does not perform a carriage return. The current line spacing setting is not affected. n must be in the range 0 to 255. The actual vertical distance moved may not be exactly the distance you specify due to the printer's 600 dots per inch resolution. LPRINT CHR$(27); CHR$(74); CHR$(54); '1/4" line feed CHAPTER 6 EPSON - 15