Brother International HL-L2300D Command Reference Guide for Software Developer - Page 78
Esc$=chr$27, For I=33 To 127, Lprint Chr$i, Lprint, For I=33 To 127, Lprint Chr$i, Lprint, Lprint
View all Brother International HL-L2300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
The selection will apply to whichever font you are currently specifying (primary or secondary). If the printer doesn't have the specified size font, the next largest size font is used. If the printer doesn't have a larger sized font, the next smallest one is used. This value is ignored by the printer when a proportional spaced font is selected. 10 REM ****** CHARACTER PITCH SELECTION ****** 20 ESC$=CHR$(27) 30 WIDTH "LPT1:",255 40 REM --- SELECT A 10 CPI PITCH FONT ---50 LPRINT ESC$+"(s10H"; 60 FOR I=33 TO 127 70 LPRINT CHR$(I); 80 NEXT 90 LPRINT 100 REM --- SELECT A 12 CPI PITCH FONT --110 LPRINT ESC$+"(s12H"; 120 FOR I=33 TO 127 130 LPRINT CHR$(I); 140 NEXT 150 LPRINT 160 REM --- PAPER EJECT --170 LPRINT CHR$(12); 180 END 5.2.8. Selecting the height Esc(s#V (27)(40)(115)#(86) # This command designates the height of the primary font. Esc)s#V (27)(41)(115)#(86) # This command designates the height of the secondary font. # is the size in points (1/72") from 0.25 to 999.75 in 0.25 increments. This value is ignored by the printer when a fixed-spaced scalable font is selected. 5.2.9. Scaling the scalable fonts vertically or horizontally EscCR!#H (27)(13)(33)#(72) # This command designates the height of the scalable fonts. EscCR!#V (27)(13)(33)#(86) # This command designates the width of the scalable fonts. # can be from 0.25 ~ 3.00 in 0.01 increments. # value is set to 0.25 when # is specified less than 0.25, and # value is set to 3.00 when # is specified bigger than 3.00. The value set by this command is initialized when the emulation is changed, a printer Reset, Test Print or Macro overlay is executed. 5.2.10. Selecting the style Esc(s#S (27)(40)(115)#(83) # This command designates the style of the primary font. Esc)s#S (27)(41)(115)#(83) # This command designates the style of the secondary font. If you select a particular style (for example upright condensed outline) the command will only take effect if the font is available in one of the three font locations. CHAPTER 2 PCL - 58