Brother International HL-L2300D Command Reference Guide for Software Developer - Page 330
Set n/216 line spacing
View all Brother International HL-L2300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 330 highlights
Line spacing and tabs Set 1/8" line spacing Esc0 (27)(48) This command sets the line spacing to 1/8". All subsequent line feed operations will move the print position 1/8" down the page. LPRINT CHR$(27); CHR$(48); 'Set line spacing to 1/8". Set 7/72" line spacing Esc1 (27)(48) This command sets the line spacing to 7/72". All subsequent line feed operations will move the print position 7/72" down the page. Since the printer's resolution is 600 dots per inch the line spacing will not be exactly 7/72". LPRINT CHR$(27); CHR$(49); 'Set line spacing to 7/72". Save n/72" line spacing EscAn (27)(65)n n This command allows you to select a line spacing of n/72". Your selection does not take effect until you activate it with the Esc 2 command. Since the printer's resolution is 600 dots per inch the line spacing may not be exactly n/72". n must be in the range 1 to 85. If n is outside the range 1 to 85 the default line spacing, 1/6" is selected. LPRINT CHR$(27); CHR$(65); CHR$(10); 'Select line spacing of 10/72". Activate n/72" line spacing Esc2 (27)(50) This command allows you to activate the line spacing setting you specified with the Esc A command. LPRINT CHR$(27); CHR$(50); 'Activate selected line spacing of n/72". Set n/216" line spacing Esc3n (27)(51)n n This command sets the line spacing to n/216". All subsequent line feed operations will move the print position n/216" down the page. Since the printer's resolution is 600 dots per inch the line spacing may not be exactly n/216". n must be in the range 1 to 255. LPRINT CHR$(27); CHR$(51); CHR$(25); 'Select line spacing of 25/216". Execute n/216" line spacing EscJn (27)(74)n n This command moves the print position one line down the page using a line spacing of n/216". The existing line space setting is not affected. LPRINT CHR$(27); CHR$(50); CHR$(30); 'Move print position down 30/216". CHAPTER 7 IBM PROPRINTER - 12