Brother International HL-L2300D Command Reference Guide for Software Developer - Page 87
PCL - 67
View all Brother International HL-L2300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Byte 15 (MSB) 8 7 (LSB) 0 0 Font Descriptor Size (>72) 2 Descriptor Format (15) Font Type 4 Style MSB Reserved 6 Base Line Position 8 Cell Width 10 Cell Height 12 Orientation Spacing 14 Symbol Set 16 Pitch (Default HMI) 18 Height 20 x-Height 22 Width Type Style LSB 24 Stroke Weight Typeface LSB 26 Typeface MSB Serif Style 28 Quality Placement 30 Underline Distance Underline Thickness 32 Text Height 34 Text Width 36 First Code 38 Last Code / Number of characters 40 Pitch Extended Height Extended 42 Cap Height 44 - 47 Font Number 48 - 63 Font Name 64 Scale Factor 66 Master Underline position 68 Master Underline Thickness 70 Font Scaling Technology Variety 72 [ additional data may be inserted here ] Desc. size Segmented Font data # - 2 Reserved Checksum Attributes are in one of six numerical formats. Unsigned integer (UI) 0 to 65535 Unsigned long integer (ULI) 0 to 232-1 Signed integer (SI) -32768 to 32767 Unsigned byte (UB) 0 to 255 Signed byte (SB) -128 to 127 Boolean 0 or 1 Font descriptor size (UI) - the size in bytes of the font descriptor block. Minimum size values for each font type are shown in the above figure. Descriptor format (UB) - format type of the font. 0 Bitmap font 10 Intellifont bound scalable font 11 Intellifont unbound scalable font 15 TrueType bound scalable font 20 Special bitmap font Font type (UB) - specifies type of symbol set. 0 Bound font. A 7-bit font with character codes 20H to 7FH acceptable. 1 Bound font. An 8-bit font with character codes 20H to 7FH and 80H to FFH acceptable. 2 Bound font. 8-bit all character codes are printable. However, 00H, 07H to 0FH and 1BH are printable only when the data is defined as transparent print data. CHAPTER 2 PCL - 67