Brother International HL-L2350DW Online Users Guide HTML - Page 156
Jam 2-sided, Jam Rear, Jam Tray 1, Manual Feed, Media Mismatch, No Drum Unit, No Paper, No Toner - toner cartridge
View all Brother International HL-L2350DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Error Message Jam 2-sided Jam Inside Jam Rear Jam Tray 1 Manual Feed Media Mismatch No Drum Unit No Paper No Paper T1 No Toner Out of Memory Print Data Full Cause Action The paper is jammed in the 2sided tray or inside the back cover. Remove the 2-sided tray and open the back cover to pull out all jammed paper. The paper is jammed inside the machine. Open the front cover, remove the toner cartridge and drum unit assembly, and pull out all jammed paper. Close the front cover. The paper is jammed in the back Open the fuser cover and remove all jammed of the machine. paper. Close the fuser cover. The paper is jammed in the indicated paper tray. Pull out the paper tray indicated on the LCD and remove all jammed paper. Manual was selected as the paper Place paper in the manual feed slot. source in the printer driver, but there is no paper in the manual feed slot. The media type specified in the printer driver differs from the paper type specified in the machine's menu. Load the correct type of paper in the tray indicated on the LCD, and then select the correct media type in the Paper Type setting on the machine. The drum unit is not installed correctly. Reinstall the toner cartridge and drum unit assembly. The machine is out of paper, or • paper is not loaded correctly in the paper tray. • • Refill paper in the paper tray. Make sure the paper guides are set to the correct size. If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. Do not overfill the paper tray. The machine failed to feed paper from the indicated paper tray. Do one of the following: • Refill paper in the paper tray indicated on the LCD. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. • Do not overfill the paper tray. The toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge and drum unit assembly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine. If the problem continues, replace the toner cartridge with a new one. The machine's memory is full. Press and hold Go for about two seconds and reduce the print resolution. The machine's memory is full. Press and hold Go for about two seconds and delete the previously stored print data. 152