Brother International Innov-ís 1000 Users Manual - English - Page 24
Winding/Installing the Bobbin
View all Brother International Innov-ís 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Winding/Installing the Bobbin This section describes how to wind the thread onto the bobbin, and then insert the bobbin thread. 1 Bobbin precautions Winding the bobbin Be sure to observe the following precautions concerning the bobbin. CAUTION ● Only use the Bobbin (part code: SA156, SFB: XA5539-151) designed specifically for this sewing machine. Use of any other bobbin may result in injuries or damage to the machine. ● The included bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, SFB: XA5539-151). Wind the thread around the bobbin to prepare the bobbin thread. Turn on the sewing machine. a Open the top cover. b 11.5 mm (7/16 inch) Actual size This model Other model Place the bobbin on the bobbin winder shaft so c that the spring on the shaft fits into the notch in the bobbin. Press down on the bobbin until it snaps into place. 1 2 a Notch b Bobbin winder shaft spring Slide the bobbin winder in the direction of the d arrow until it snaps into place. • (Start/stop button) lights up in orange. Winding/Installing the Bobbin 23