Brother International Innov-ís 1000 Users Manual - English - Page 25
Caution
View all Brother International Innov-ís 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
GETTING READY Remove the spool cap that is inserted onto the e spool pin. 1 Slide the spool cap onto the spool pin. g Slide the spool cap as far as possible to the right, as shown, with the rounded side on the left. 2 a Spool pin b Spool cap Place the spool of thread for the bobbin onto f the spool pin. Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom. CAUTION ● If the spool or the spool cap is not installed correctly, the thread may become tangled around the spool pin, causing the needle to break. ● Three spool cap sizes are available, allowing you to choose a spool cap that best fits the size of spool being used. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool or the needle may break. ● • If the spool is not positioned so that the thread unwinds correctly, the thread may become tangled around the spool pin. 24