Brother International Innov-ís 1000 Users Manual - English - Page 26

Memo z When sewing with fine, cross-wound thread, Pass the thread under the thread guide plate, i and then pull it to the right. use the small spool cap, and leave a small space between the cap and the spool. 1 cb a a Spool cap (small) b Spool (cross-wound thread) c Space z When using thread that winds off quickly, such as transparent nylon thread or metallic thread, place the spool net over the spool before placing the spool of thread onto the spool pin. If the spool net is too long, fold it to fit the size of the spool. 1 2 1 a Thread guide plate Pass the thread under the hook on the thread j guide, and then wind it counterclockwise under the pretension disk. 1 1 3 4 a Spool net b Spool c Spool cap d Spool pin While holding the thread near the spool with h your right hand, as shown, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. a Thread guide While holding the thread with your left hand, k wind the thread that was pulled out clockwise around the bobbin five or six times with your right hand. 1 a Thread guide cover Winding/Installing the Bobbin 25