Brother International Innov-ís 1000 Users Manual - English - Page 28

Installing the bobbin Install the bobbin wound with thread. • Be careful not to drop the bobbin. Insert the bobbin into the bobbin case so that d the thread unrolls to the left. CAUTION 1 ● Use a bobbin that has been correctly wound with thread, otherwise the needle may break or the thread tension will be incorrect. ● The bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, SFB: XA5539151). 11.5 mm (7/16 inch) Actual size This model Other model Slide the bobbin cover latch to the right. a 1 2 • Be sure to insert the bobbin correctly. CAUTION ● Be sure to hold down the bobbin with your finger and unroll the bobbin thread correctly, otherwise the thread may break or the thread tension will be incorrect. Memo z The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. a Bobbin cover b Latch X The bobbin cover opens. Remove the bobbin cover. b Hold the bobbin with your right hand and hold c the end of the thread with your left. Lightly hold down the bobbin with your right e hand, and then guide the thread as shown with your left hand. Winding/Installing the Bobbin 27