Brother International Innov-is 80 Operation Manual - Page 128

Restrictions on oiling, Cleaning the machine surface, Cleaning the race

Get Brother International Innov-is 80 PDF manuals and user guides View all Brother International Innov-is 80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 128 highlights

APPENDIX Care and Maintenance Simple sewing machine maintenance operations are described below. Restrictions on oiling In order to prevent damaging this machine, it must not be oiled by the user. This machine was manufactured with the necessary amount of oil applied to ensure correct operation, making periodic oiling unnecessary. Loosen the presser foot holder screw and d remove the presser foot holder, and then loosen the needle clamp screw and remove the needle. If problems occur, such as difficulty turning the handwheel or an unusual noise, immediately stop using the machine, and contact your authorized dealer or the nearest authorized service center. Cleaning the machine surface Grasp both sides of the needle plate cover, and e then slide it toward you. If the surface of the machine is dirty, lightly soak a cloth in neutral detergent, squeeze it out firmly, and then wipe the surface of the machine. After cleaning it once with a wet cloth, wipe it again with a dry cloth. CAUTION ● Unplug the power cord before cleaning the machine, otherwise injuries or an electric shock may occur. a a Needle plate cover X The needle plate cover is removed. Remove the bobbin case. f Grasp the bobbin case, and then pull it out. Cleaning the race Sewing performance will suffer if dust collects in the bobbin case; therefore, it should be cleaned periodically. Turn off the sewing machine. a Unplug the power cord from the power supply b jack on the right side of the sewing machine. CAUTION ● Unplug the power cord before cleaning the machine, otherwise injuries or an electric shock may occur. Remove the flat bed attachment. c 126 a a Bobbin case Use the cleaning brush or a vacuum cleaner to g remove any lint and dust from the race and its surrounding area. a b a Cleaning brush b Race • Do not apply oil to the bobbin case.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
APPENDIX
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
126
Care and Maintenance
Simple sewing machine maintenance operations are described below.
Restrictions on oiling
In order to prevent damaging this machine, it must
not be oiled by the user.
This machine was manufactured with the necessary
amount of oil applied to ensure correct operation,
making periodic oiling unnecessary.
If problems occur, such as difficulty turning the
handwheel or an unusual noise, immediately stop
using the machine, and contact your authorized
dealer or the nearest authorized service center.
Cleaning the machine surface
If the surface of the machine is dirty, lightly soak a
cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning it
once with a wet cloth, wipe it again with a dry cloth.
CAUTION
Cleaning the race
Sewing performance will suffer if dust collects in the
bobbin case; therefore, it should be cleaned periodically.
a
Turn off the sewing machine.
b
Unplug the power cord from the power supply
jack on the right side of the sewing machine.
CAUTION
c
Remove the flat bed attachment.
d
Loosen the presser foot holder screw and
remove the presser foot holder, and then
loosen the needle clamp screw and remove the
needle.
e
Grasp both sides of the needle plate cover, and
then slide it toward you.
a
Needle plate cover
X
The needle plate cover is removed.
f
Remove the bobbin case.
Grasp the bobbin case, and then pull it out.
a
Bobbin case
g
Use the cleaning brush or a vacuum cleaner to
remove any lint and dust from the race and its
surrounding area.
a
Cleaning brush
b
Race
• Do not apply oil to the bobbin case.
●
Unplug the power cord before cleaning
the machine, otherwise injuries or an
electric shock may occur.
●
Unplug the power cord before cleaning
the machine, otherwise injuries or an
electric shock may occur.
a
a
a
b