Brother International Innov-is 80 Operation Manual - Page 141
The thread tension, is incorrect., The fabric is, wrinkled., Stitches are, skipped.
View all Brother International Innov-is 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Symptom Probable Cause Remedy Reference The upper thread was not threaded correctly. Correct the upper threading. page 28 The bobbin thread is incorrectly installed. Correctly install the bobbin thread. page 26 The thread tension is incorrect. The combination of fabric, thread and needle is not correct. Select a thread and needle that are appropriate for the type of fabric being sewn. The presser foot holder is incorrectly Correctly install the presser foot installed. holder. page 38 page 43 The thread tension is incorrect. Adjust the tension of the upper thread. page 57 A bobbin designed specifically for this machine is not used. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. page 22 The upper thread was not threaded Correctly thread the upper thread correctly, or the bobbin is incorrectly and correctly install the bobbin installed. thread. page 26, page 28 4 The spool is incorrectly installed. Correctly install the spool. page 28 The fabric is wrinkled. The combination of fabric, thread and needle is not correct. The needle is bent or blunt. Select a thread and needle that are appropriate for the type of fabric being sewn. Replace the needle. page 38 page 39 If thin fabrics are being sewn, the stitch is too long. Shorten the stitch length or sew with stabilizer material under the fabric. page 59 The thread tension is incorrect. Adjust the tension of the upper thread. page 57 The upper thread was not threaded correctly. Correct the upper threading. page 28 Stitches are skipped. The combination of fabric, thread and needle is not correct. The needle is bent or blunt. Select a thread and needle that are appropriate for the type of fabric being sewn. Replace the needle. page 38 page 39 The needle is incorrectly installed. Correctly install the needle. page 39 Dust has accumulated under the Remove the needle plate cover needle plate or in the bobbin case. and clean the race. page 126 Troubleshooting 139