Brother International Innov-is BQ950 Operation Manual - Page 34
presser foot N or attach stabilizer material.
View all Brother International Innov-is BQ950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Upper Threading Insert the horizontal spool pin onto the bobbin winder d shaft. Insert the horizontal spool pin so that it is perpendicular to the bobbin winder shaft. 1 Without passing the thread through the needle bar h thread guide, manually thread the right needle. Insert the thread through the eye of the needle from the front. 1 Bobbin winder shaft Swing the spool pin toward the left so that it is e horizontal. • The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the machine may be damaged. Attach zigzag foot "J". i • For details on changing the presser foot, refer to "Replacing the presser foot" on page B-31. Place the upper thread spool for the needle on the right f side onto the horizontal spool pin, and then secure it with the spool cap. The thread should unroll from the top front of the spool. 1 2 1 Spool cap 2 Spool Thread the upper thread in the same way that the g upper thread for the left side was threaded. 1 CAUTION • When using the twin needle, be sure to attach zigzag foot "J". If bunched stitches occur, use presser foot "N" or attach stabilizer material. Turn on the machine and select a stitch. j • For stitch selection see "Selecting a stitch pattern" on page B-34. • See "Stitch Setting Chart" on page B-46 for stitches that use a twin needle. CAUTION • When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged. Select (Twin needle) in the settings screen. k Set the twin needle mode to "ON." l 1 Thread guide cover • For details, refer to steps g through i of "Threading the upper thread" on page B-21. Press . m CAUTION • When using the twin needle, be sure to select the twin needle setting, otherwise the needle may break or the machine may be damaged. B-26