Brother International Innov-is BQ950 Operation Manual - Page 98
Eyelet Stitching
View all Brother International Innov-is BQ950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Eyelet Stitching Eyelet Stitching Eyelets, such as those on belts, can be sewn. • Using the table below, refer to "Using the utility stitch tables in the "Sewing" section" in the "Basic operations" section. Use the eyelet punch to cut a hole in the center of the f eyelet. Model 4 Model 3, 2 Model 1 Presser foot Stitch name Stitch Eyelet stitch Stitch number 4-15 91 71 N Attach monogramming foot "N". a Select stitch . b Adjust either the stitch width or the stitch length to c select the desired eyelet size. • When using the eyelet punch, place thick paper or some other protective sheet under the fabric before punching the hole in the fabric. Memo • If thin thread is used, the stitching may be too open. If this occurs, sew the eyelet twice before removing the fabric, one on top of the other. 1 2 3 1 7mm 2 6mm 3 5mm • For details, refer to "Setting the stitch width" and "Setting the stitch length" in the "Basic operations" section. Lower the needle into the fabric at the beginning of the d stitching, and then lower the presser foot lever. Start sewing. e → Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. S-38