Brother International Innov-is VM5100 Operation Manual - Page 124
Hemstitching 2 Drawn Work 1, Hemstitching 3 Drawn Work 2
View all Brother International Innov-is VM5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
SEWING THE STITCHES c Start sewing. Example: Illustration of finished product d Press stitch. to create a mirror image of the e Match beginning needle drop points on the opposite edge of the open area to keep the stitching symmetrical. ■ Hemstitching (2) (Drawn Work (1)) a Pull out several threads from one piece of fabric to open the area. area on a * Pull out 5 or 6 threads to leave a 3 mm (approx. 1/8 inch) area open. ■ Hemstitching (3) (Drawn Work (2)) a Pull out several threads from both sides of the 4 mm (approx. 3/16 inch) area which are not yet open. * Pull out four threads, leave five threads, and then pull out four threads. The width of five threads is approximately 4 mm (approx. 3/16 inch) or less. Memo • Loosely woven fabrics work best for this. b Select . Memo • For details on each stitch, refer to the "STITCH SETTING CHART" on page S-67. c Attach presser foot of the fabric facing "N". With the right side up, sew one edge of the open area. a Approx. 4 mm (approx. 3/16 inch) or less b Four threads (pull out) c Five threads (leave) b Select . Memo • For details on each stitch, refer to the "STITCH SETTING CHART" on page S-67. S-54