Brother International IntelliFax-2820 Users Manual - English - Page 50
Dual Access, Real Time Transmission, Stop/Exit, Start, Menu/Set - setup
UPC - 012502613251
View all Brother International IntelliFax-2820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Setup Send Dual Access You can dial a number, and begin scanning the fax into memory-even when the machine is sending from memory, receiving faxes or printing PC data. The LCD shows the new job number. Note ■ The number of pages you can scan into the memory will vary depending on the data that is printed on them. ■ If you get an Out of Memory message while scanning the first page of a fax, press Stop/Exit to cancel scanning. If you get an Out of Memory message while scanning a subsequent page, you can press Start to send the pages scanned so far, or press Stop/Exit to cancel the operation. Real Time Transmission When you are sending a fax, the machine will scan the documents into the memory before sending. Then, as soon as the phone line is free, the machine will start dialing and sending. If the memory is full, the machine will send the 3 document in real time (even if Real Time TX is set to Off). Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can set Real Time TX to On for all documents or Next Fax:On or Next Fax:Off for the next fax only. 1 If it is not illuminated in green, press (Fax). 2 Press Menu/Set, 2, 2, 5. 5.Real Time TX 3 To change the setting, press ▲ or ▼ to select On, Next Fax:On, Next Fax:Off or Off. Press Menu/Set. 3 - 6