Brother International LB-6770THRD Users Manual - English - Page 35
If the spool or the spool cap is not, positioned correctly, the thread may, become tangled around
View all Brother International LB-6770THRD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Slide the spool cap onto the spool pin and f return the spool pin to its original position. Pass the thread behind the thread guide cover h and to the front. Slide the spool cap as far as possible to the right While holding the thread near the spool with as shown, with the rounded side on the left. your right hand, pull the thread with your left hand as shown below. 1 CAUTION ● If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break. Pull the thread from the spool and pass the g thread under the hook of the thread guide. a a Thread guide a b d c a Thread guide cover b Thread guide spring c Thread d When the presser foot lever is lowered Note z When passing the thread behind the thread guide cover, be sure to use both hands. If you do not hold the thread with your right hand, the thread will be loose and you cannot hang the thread on the thread guide spring correctly. It may cause incorrect thread tension. z Make sure that the presser foot lever is raised before passing the thread behind the thread guide cover. If the presser foot lever is lowered, the thread guide spring is shut and you cannot hang the thread on the thread guide spring correctly. Pass the thread through the guides in the order i shown below. 3 1 4 2 Upper Threading 33