Brother International LB-6770THRD Users Manual - English - Page 47
Removing and attaching the, presser foot holder
View all Brother International LB-6770THRD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Removing and attaching the ■ Attaching the presser foot holder presser foot holder Raise the presser foot lever. a X The presser foot is raised. Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that Align the presser foot holder with the lower- 1 does not use the presser foot holder, such as the b left side of the presser bar. embroidery foot, optional free-motion open toe quilting foot "O" and optional walking foot. Use the screwdriver to remove the presser foot holder. CAUTION z Before attaching/removing the presser foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if a button is accidentally pressed and the machine starts sewing. a b Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 43). Use the screwdriver to loosen the presser foot b holder screw. a Presser bar b Presser foot holder Hold the presser foot holder in place with your c right hand, and then tighten the screw using the screwdriver in your left hand. c a d b a Screwdriver b Presser foot holder c Presser foot holder screw d Presser bar X The presser foot is removed from the presser bar. ab a Screwdriver b Presser foot holder CAUTION z Do not hit the needle with your finger or the presser foot when attaching/removing it. The needle may break or cause injury. z Be sure to tighten the screw with the included screwdriver. If the screw is loose, the needle may hit the presser foot and break or bend. Replacing the Presser Foot 45