Brother International LB-6770THRD Users Manual - English - Page 39
The needle threader cannot be used
View all Brother International LB-6770THRD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Insert the extra spool pin into the end of the d bobbin winder shaft, and install the thread spool on it. Then, thread the upper thread. Without passing the thread through the needle f bar thread guide, manually thread the right needle. Pass the thread through the eye of the needle from the front. 1 a Bobbin winder shaft b Extra spool pin c Thread spool Memo z When setting the thread spool, set it so that the thread winds off from the front of the spool. Thread the upper thread for the right side in e the same way that the upper thread for the left side was threaded. CAUTION ● The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the sewing machine may be damaged. Attach zigzag foot "J". g For details on changing the presser foot, refer to "Replacing the Presser Foot" (page 43). CAUTION ● When using the twin needle, be sure to attach zigzag foot "J". If bunched stitches occur, use presser foot "N" or attach stabilizer material. • For details, refer to steps g through j of "Threading the upper thread" (page 33). Turn on the sewing machine and select a h stitch. • For stitch selection see "Selecting stitching" (page 49). • See "Stitch Setting Chart" (page 70) for stitches that use a twin needle. CAUTION ● When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged. Upper Threading 37