Brother International MFC-4450 Users Manual - English - Page 82
C) CONNECTING TO A TELEPHONE ANSWERING DEVICE (TAD), How to use an External TAD with the MFC
View all Brother International MFC-4450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
MFC 4450/OP-US-5.0 RECEIVING FAXES AND OTHER CALLS REMOTE ACTIVATION 6. Enter new remote code to activate. (Factory setting is *51.) Then press Set. 7. Enter new remote code to deactivate. (Factory setting is #51.) 8. PressSet. 9. PressStoptoexit. ACT.CODE:*51 DEACT.CODE:#51 5:REMOTE CODE C) CONNECTING TO A TELEPHONE ANSWERING DEVICE (TAD) How to Use an External TAD with the MFC When you have a Telephone Answering Device on the fax phone line, the TAD will answer all the incoming calls. Your Brother MFC will listen in on the line for fax CNG tones. If it hears them, it will take over the call and receive the fax message. If it does not hear fax tones, it will let the TAD continue playing the outgoing message so the caller can leave a voice message. The TAD must answer within 4 rings. The MFC can not hear the CNG calling tones until the TAD answers the call. When the Ring Delay is set for 4 rings, only 8-10 seconds of CNG calling tones are left for the "handshake". So you must strictly follow the instructions for recording the OGM. You must erase the incoming messages frequently on your TAD. When the TAD's memory is full it will not answer any incoming calls (fax or voice). 6-15