Brother International MFC-5895cw Quick Setup Guide - English - Page 29

For Wireless Network Users 17 Confirm your network environment (Infrastructure Mode) The following instructions will offer two methods for installing your Brother machine in a wireless network environment. Both methods are for infrastructure mode, using a wireless access point/router that uses DHCP to assign IP addresses. Choose a configuration method and proceed to the page indicated. a If your wireless access point/router does not support Wi-Fi Protected Setup™ or AOSS™, write down the wireless network settings of your wireless access point/router in the area below. IMPORTANT If you do not know this information (Network Name (SSID/ESSID), and Password), you cannot continue the wireless setup. You should see the documentation provided with your wireless access point/router, consult the router manufacturer, or your system administrator. Item Record the current wireless network settings Network Name: (SSID/ESSID) Password Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using more than one WEP KEY enter the KEY used for the first WEP KEY. Now go to page 30 b If your wireless access point/router supports automatic wireless (one-push) setup (Wi-Fi Protected Setup™ or AOSS™) Now go to page 32 Wireless Network 29