Brother International MFC-8820D Network Users Manual - English - Page 109
DLC/LLC, Net BIOS/IP, Ethernet, 10BaseT Full Duplex 10B-FD or Half Duplex 10B-HD fix the print
View all Brother International MFC-8820D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
3 Press Set. 4 Press Stop/Exit. DLC/LLC 1 Press Menu, 6, 6, 4. 2 Press or to select On or Off. 3 Press Set. 4 Press Stop/Exit. Net BIOS/IP The NC-9100h Print / Fax Server supports SMB (Server Message Block) over the TCP/IP protocol via the NetBIOS interface. This means that just like regular Windows® PC's the machine can appear in your network neighborhood. The main advantage of NetBIOS printing is that you are able to print from legacy DOS applications that are running on PC's that are connected to Microsoft networks. 1 Press Menu, 6, 6, 5. 2 Press or to select On or Off. 3 Press Set. 4 Press Stop/Exit. Ethernet Ethernet link mode. Auto allows the print server to operate in 100BaseTX full or half duplex, or in 10BaseT half duplex mode by auto negotiation. 100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print server link mode. This change is valid after the print server has been reset. If you incorrectly set this value, you may not be able to communicate with your print server. 10 - 20 FRONT PANEL SETUP MENU