Brother International MFC-8820D Network Users Manual - English - Page 95
Gateway, Host Name, 6 FRONT PANEL SETUP MENU
View all Brother International MFC-8820D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Gateway This field displays the current gateway or router address used by the machine. If you are not using DHCP or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank. Check with your network manager if you are unsure. 1 Press Menu, 6, 1, 4. 2 Select 1 to change. Enter the Gateway address. 3 Press Set. 4 Press Stop/Exit. Host Name You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRN_XXXXXX (where XXXXXX is the last six digits of the Ethernet address) (up to 15 characters). 1 Press Menu, 6, 1, 5. 2 Select 1 to change. Enter the Host Name. 3 Press Set. 4 Press Stop/Exit. 10 - 6 FRONT PANEL SETUP MENU