Brother International MFC-8950DW Advanced User's Guide - English - Page 85
Optional paper tray (LT-5400), Memory board, SO-DIMM Types - specification sheet
View all Brother International MFC-8950DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Optional paper tray (LT-5400) B An optional lower tray can be installed on the MFC-8950DW 1, and it can hold up to 500 sheets of 20 lb (80 g/m2) paper. When an optional tray is installed, the machine can hold up to 1050 sheets of plain paper. For setup, see the Instructions that we have supplied with the lower tray unit. 1 Tray 2 is standard on MFC-8950DWT. WARNING If you use a Lower Tray, DO NOT carry the machine with the Lower Tray as you may be injured or cause damage to the machine because it is not attached to the Lower Tray. Options Memory board B MFC-8950DW(T) has 128 MB of standard memory. The machine has one slot for optional memory expansion. You can increase the memory up to maximum of 384 MB by installing one SO-DIMM (Small Outline Dual In-line Memory Module). SO-DIMM Types B For information regarding memory for your Brother machine please visit us at: http://www.brother-usa.com/support/ memory/. In general, the SO-DIMM must have the following specifications: Type 144-pin and 16-bit output CAS latency 4 Clock frequency 267 MHz (533 Mb/S/Pin) or more Capacity 256 MB B Height 1.18 in. (30.0 mm) DRAM type DDR2 SDRAM Note • There might be some SO-DIMMs that will not work with the machine. • For more information, call the dealer you bought the machine from or Brother Customer Service. 79