Brother International MFC-J415w Network Users Manual - English - Page 76
WINS Config, Stop/Exit, For DCP-J715W, MFC-J615W and MFC-J630W, Static
View all Brother International MFC-J415w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Control panel setup e Press a or b to choose Node Name. Press OK. f Enter the Node Name. (For MFC models) Press OK. (For DCP models) Press a, b, d or c to select OK , and press OK. Note For DCP models, for information how to enter text, see Entering Text on page 112. g Press Stop/Exit. WINS Config This selection controls how the machine obtains the IP address of the WINS server. a Press Menu. b Press a or b to choose Network. Press OK. c For DCP-J715W, MFC-J615W and MFC-J630W (For Wired) Press a or b to choose Wired LAN, and press OK. (For Wireless) Press a or b to choose WLAN, and press OK. d Press a or b to choose TCP/IP. Press OK. e Press a or b to choose WINS Config. Press OK. f (For DCP-J315W, MFC-J265W and MFC-J415W) Press a or b to choose Auto or Static. Press OK. (For DCP-J515W, DCP-J715W, MFC-J615W and MFC-J630W) Press d or c to choose Auto or Static. Press OK. g Press Stop/Exit. 5 5 Auto 5 Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS servers. You must set the BOOT Method to Auto or DHCP for this feature to work. Static 5 Uses a specified IP address for the primary and secondary WINS servers. 69