Brother International MFC-J6510DW Users Manual - English - Page 89
Error Message, Cause, Action, DR Mode in Use, High Temperature, Hub is Unusable., Image Too Long. - printer manual
UPC - 012502626626
View all Brother International MFC-J6510DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Troubleshooting Error Message Cause Action DR Mode in Use The machine is set to Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off. (See Turning off Distinctive Ring on page 45.) High Temperature The print head is too warm. Allow the machine to cool down. Hub is Unusable. A Hub or USB Flash memory drive with Hub has been connected to the USB direct interface. A Hub or USB Flash memory drive with Hub are not supported. Unplug the device from the USB direct interface. Image Too Long. The proportions of your photo are irregular so effects could not be added. Choose a regularly proportioned image. Image Too Small. The size of your photo is too small to Choose a larger image. trim. Ink Absorber Full The ink absorber box or flushing box is The ink absorber box or flushing box full. These components are periodic will need to be replaced. Contact maintenance items that may require Brother Customer Service or a Brother replacement after a period of time to Authorized Service Center to have ensure optimum performance from your machine serviced. (See Brother your Brother machine. The need to numbers on page i.) replace these items and the time period before replacement is Other reasons for cleaning are: dependent on the number of purges 1 Machine automatically cleans after and flushes required to clean the ink clearing a printer jam. system. These boxes acquire amounts of ink during the different purging and flushing operations. The number of times a machine purges 2 Machine automatically cleans after sitting idle for more than 45 days (infrequent use). and flushes for cleaning varies depending on different situations. For example, frequently powering the machine on and off will cause numerous cleaning cycles since the machine automatically cleans upon power up. The use of non-Brother ink may cause frequent cleanings because non-Brother ink could cause B poor print quality which is resolved by cleaning. The more cleaning the machine requires the faster these boxes will fill up. Note Repairs resulting from the use of non-Brother supplies may not be covered under the stated product warranty. 75