Brother International MFC-J6520DW Quick Setup Guide - Page 2

a Remove the protective tape and film covering the machine, and also from the Touchscreen. b Make sure you have all the components. NOTE • Save all packing materials and the box in case for any reason you must ship your machine. • You need to purchase the correct interface cable for the interface you want to use (for USB or network connection). USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 16 feet (five meters) long. Network cable Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network. 2 Connect the power cord and telephone line NOTE DO NOT connect the USB cable yet (if you are using a USB cable). a Connect the power cord. NOTE • If you do not plan to use the fax feature on this machine, go to step 3 on page 4. • To prolong the life of the print head, provide the best ink cartridge economy and maintain print quality, we do not recommend unplugging the machine frequently and/or leaving the machine unplugged for extended periods of time. Each time you plug the machine in, it automatically cleans the print heads, which uses some of your ink. We recommend using to power down the machine. Using allows minimal power to the machine, resulting in periodic, but less frequent, cleaning of the print heads. b Lift the scanner cover until it locks securely into the open position. 2