Brother International MacBroidery„ Embroidery Lettering Software for Mac - Page 5
Leather, Lycra
View all Brother International MacBroidery„ Embroidery Lettering Software for Mac manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
5 Pacesetter MacBroidery™ Embroidery Lettering Software - Recipes Leather Embroidery Designs for leather should be carefully chosen. Open designs with no underlay and low stitch counts will provide the best results. Because it is very likely that hooping leather will leave marks it is advisable to hoop the stabilizer and then adhere the leather on top. Fabric Thickness: Medium to Heavy Fabric Stretch: Light to a lot Needle: Size 14 leather needle Thread: Polyester embroidery thread Stabilizer: SA5815 Tear-Away Medium Weight Adhesive Stabilizer Lycra The stretch of Lycra fabrics can vary from a little to a lot. To keep stretching to a minimum designs with lower stitch counts work best. If the embroidery design is more detailed the fabric could begin to pucker or ripple. To minimize stretching the fabric first hoop the stabilizer and then adhere the Lycra on top. Then place a piece of cut away stabilizer under the hoop. It is recommended that designs to be sewn on Lycra projects always be tested on the fabric before embroidering the final project. Fabric Thickness: Medium Fabric Stretch: A lot Needle: Stretch needle, Size 12 Thread: Polyester machine thread Stabilizer: SA5906 Lightweight Adhesive back water soluble Stabilizer SA5929 Cut-Away Heavy Weight Stabilizer