Brother International MacBroidery„ Embroidery Lettering Software for Mac - Page 9

Page 9 highlights

9 Pacesetter MacBroidery™ Embroidery Lettering Software - Recipes Sweat Shirt Sweat shirt fabric is stretchy, usually heavy and difficult to hoop. Hoop the stabilizer then adhere the fabric onto the stabilizer. Place a piece of cut away under the hoop A water soluble topping may be needed on top to keep the stitches from sinking into the fabric. Fabric Thickness: Medium to Heavy Fabric Stretch: Light to Much Needle Size: Size 11 embroidery needle Thread: Polyester embroidery thread Stabilizer: SA5906 Lightweight Adhesive Back Water Soluble Stabilizer SA5929 Cut-Away Heavy Weight Stabilizer SA520 Water Soluble Stabilizer T-Shirt T-Shirt knits can be a variety of fabric blends and range from thin to heavy. T-Shirt knits should to be stabilized on the top and bottom for best results. Stabilizing requirements may vary depending on the density of the embroidery design. Fabric Thickness: Light to heavy Fabric Stretch: Light to lots of stretch Needle: Ballpoint (stretch) Size 11 or embroidery needle size 11 Thread: Polyester embroidery thread Stabilizer: SA5810 Tear-Away Medium weight Stabilizer SA5906 Lightweight Adhesive Back Water Soluble Stabilizer SA520 Water Soluble Stabilizer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

9
Pacesetter MacBroidery
Embroidery Lettering Software
Recipes
Sweat Shirt
Sweat shirt fabric is stretchy, usually heavy and difficult to hoop.
Hoop the stabilizer then adhere the
fabric onto the stabilizer. Place a piece of cut away under the hoop A water soluble topping may be
needed on top to keep the stitches from sinking into the fabric.
Fabric Thickness: Medium to Heavy
Fabric Stretch: Light to Much
Needle Size:
Size 11 embroidery needle
Thread:
Polyester embroidery thread
Stabilizer:
SA5906 Lightweight Adhesive Back Water Soluble Stabilizer
SA5929 Cut-Away Heavy Weight Stabilizer
SA520 Water Soluble Stabilizer
T-Shirt
T-Shirt knits can be a variety of fabric blends and range from thin to heavy.
T-Shirt knits should to be
stabilized on the top and bottom for best results. Stabilizing requirements may vary depending on the
density of the embroidery design.
Fabric Thickness: Light to heavy
Fabric Stretch: Light to lots of stretch
Needle:
Ballpoint (stretch) Size 11 or embroidery needle size 11
Thread:
Polyester embroidery thread
Stabilizer:
SA5810 Tear-Away Medium weight Stabilizer
SA5906 Lightweight Adhesive Back Water Soluble Stabilizer
SA520 Water Soluble Stabilizer