Brother International PE-200 Users Manual - English - Page 19
UPPER THREADING, Thread according to the number and arrow marks on the machine. - manual
View all Brother International PE-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
CONTENTS MACHINE KNOWLEDGE UPPER THREADING Thread according to the number and arrow marks on the machine. 1 1 "BASIC OPERATION" key 3 A * 1 2 4 EMBROIDERING MAINTENANCE ERROR MESSAGE TROUBLESHOOTING PATTERNS EMBROIDERING USING A SMALL FRAME (OPTIONAL) ** 1. Raise the presser foot lever (If the presser foot is not raised, the upper thread cannot be threaded.) 2. Turn the balance wheel to raise the needle to its highest position. 3. Guide the thread as illustrated with the solid line on the machine following the number sequence. 4. Lower the presser foot. 5. Thread the needle using the auto needle threading device (See page 17) or manually. 5 * Be sure the spool felt is behind the spool. (shown above *) ** You do not need to pull the lower thread up before you start embroidering. CAUTION Always be sure to raise the presser foot before removing the upper thread to prevent damage to the thread tension system. USING THE EXTRA SPOOL PIN AND NET Extra spool pin Use when embroidering with metallic thread. 1. Insert the extra spool pin into the hole on the top of the machine. 2. Install the spool felt and the thread spool in that order, and then thread the upper thread. * Do not thread the thread onto bracket (A). * When sewing using the metallic thread, set thread tension control dial (B) to the "0" position. * When setting the thread spool, set it so that the thread winds off from the front of the spool. * If using metallic thread, we recommend that you use a 90/14 home sewing machine needle. 1 Insert the extra spool pin into the hole on the top of the machine 2 Spool felt 3 Thread spool NOTE This method keeps the thread from twisting as it comes off the spool pin. 16 EMBROIDERING USING A EXTRA-SMALL FRAME (OPTIONAL) EMBROIDERING USING A LARGE FRAME (OPTIONAL)