Brother International PE-200 Users Manual - English - Page 48
Embroidering from a specific starting point, Changing the pattern direction, ABC
View all Brother International PE-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CONTENTS MACHINE KNOWLEDGE EMBROIDERING MAINTENANCE Embroidering from a specific starting point 1. Make a mark at the starting position on the fabric in the frame as shown in the illustration. The mark cannot be too close to the edge of the frame as the presser foot prevents the needle from getting very close to the frame. 2. Touch "START/CENTER" to select "START" and then touch the arrow key to align the hole of the presser foot with the mark. ABC 3. Embroider the pattern. ERROR MESSAGE TROUBLESHOOTING PATTERNS EMBROIDERING USING A SMALL FRAME (OPTIONAL) EMBROIDERING USING A EXTRA-SMALL FRAME (OPTIONAL) Changing the pattern direction ABC ABC ABC ABC ABC The pattern will be rotated clockwise in 90˚ steps as shown in the illustration at left each time "90˚ clockwise" is touched. 45 EMBROIDERING USING A LARGE FRAME (OPTIONAL)