Brother International PE-200 Users Manual - English - Page 60
Maintenance, Changing The Light Bulb
View all Brother International PE-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
CONTENTS MACHINE KNOWLEDGE EMBROIDERING MAINTENANCE MAINTENANCE CHANGING THE LIGHT BULB 1 When replacing the light bulb 1. Turn the main power switch off. 1 ON 2 OFF * The power cord plug must be removed from the socket outlet prior to changing the bulb. 3 2 4 2. Loosen the screw in the end cap at the left side of the machine. 3. Remove the end cap. 4. Replace the snap-in light bulb with a new one of the same type. * Light bulbs are available through your dealer. (8 V, 2.4 W/ Parts code X50228-001 or item #SA105.) ERROR MESSAGE TROUBLESHOOTING PATTERNS EMBROIDERING USING A SMALL FRAME (OPTIONAL) EMBROIDERING USING A EXTRA-SMALL FRAME (OPTIONAL) EMBROIDERING USING A LARGE FRAME (OPTIONAL) 57
57
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING
MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
MAINTENANCE
CHANGING THE LIGHT BULB
1
2
3
4
When replacing the light bulb
1.
Turn the main power switch off.
1
ON
2
OFF
*
The power cord plug must be removed from the socket
outlet prior to changing the bulb.
2.
Loosen the screw in the end cap at the left side of the
machine.
3.
Remove the end cap.
4.
Replace the snap-in light bulb with a new one of the same
type.
*
Light bulbs are available through your dealer. (8 V, 2.4 W/
Parts code X50228-001 or item #SA105.)