Brother International PE-200 Users Manual - English - Page 31
Start embroidering, After trimming, lower the presser foot
View all Brother International PE-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
CONTENTS MACHINE KNOWLEDGE EMBROIDERING MAINTENANCE Start embroidering 1. After threading the needle, pass the thread from the top to the bottom through the hole of the presser foot, and gently pull the end of the thread. 2. Lower the presser foot and press the "START/STOP" button to start the machine. After sewing 5 - 6 stitches, stop the machine and raise the presser foot again. Trim off any excess thread at the edge of the design. After trimming, lower the presser foot and press the "START/STOP" button again to start the machine. 3. The machine will stop sewing when it has completed all the stitching with the current thread color. ERROR MESSAGE TROUBLESHOOTING PATTERNS EMBROIDERING USING A SMALL FRAME (OPTIONAL) EMBROIDERING USING A EXTRA-SMALL FRAME (OPTIONAL) EMBROIDERING USING A LARGE FRAME (OPTIONAL) 28