Brother International PJ-883 ESC/ P Brother Command Reference - Page 102
ESC i a Switch command mode
View all Brother International PJ-883 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
ESC/P Command Reference ESC i a Switch command mode ASCII: ESC i a n Hexadecimal: 1B 69 61 n Parameters n: Command mode 00h or 30h ('0'): ESC/P Legacy / Raster mode 03h or 33h ('3'): P-touch Template mode 04h or 34h ('4'): ESC/P Brother mode FFh: Switch to the initial mode (power-on default) Description Switches the command execution mode. Dynamically switches between the five modes. Since this is a dynamic command, after the printer is turned off and on again, the setting returns to the previously setting. Invalid if n is a value outside of the allowable range. - 96 - 5. Control Command Details
ESC/P Command Reference
- 96 -
5. Control Command Details
ESC i a
Switch command mode
ASCII:
ESC
i
a
n
Hexadecimal: 1B
69
61
n
Parameters
n:
Command mode
00h or 30h (‘0’): ESC/P Legacy / Raster mode
03h or 33h (‘3’): P-touch Template mode
04h or 34h (‘4’): ESC/P Brother mode
FFh: Switch to the initial mode (power-on default)
Description
Switches the command execution mode.
Dynamically switches between the five modes.
Since this is a dynamic command, after the printer is turned off and on again, the setting returns to the
previously setting.
Invalid if n is a value outside of the allowable range.