Brother International PJ-883 ESC/ P Brother Command Reference - Page 37

ESC/P Command Reference ESC g Apply micron pitch (15 cpi) ASCII: ESC g Hexadecimal: 1B 67 Parameters None Description  Prints the subsequent text with the micron pitch (15 characters/inch).  This command is not applied to 203dpi printers.  The character spacing is 20 dots.  If the character width is 20 dots or less, the character spacing is specified as 20 minus the character width.  If the character width exceeds 20 dots, the character spacing is specified as the character width. (The spacing between characters is 0 dot.) In this case, the pitch does not exactly equal the micron pitch.  With double-width characters, the character spacing is doubled (40 dots).  With half-width characters, the character spacing is halved (10 dots).  When the character spacing is changed with ESC SP, the setting is updated.  This command is invalid when proportional pitch is selected.  In outline fonts, the spacing between characters is 0 dot. Example For a 11-dot font at full width: Full width 11 dots Double width 22 dots Ａ Ｂ Ａ Ｂ 9 dot 18 dots - 31 - 5. Control Command Details