Brother International PR-600II Users Manual - English - Page 191
Make sure that each hexagonal screw is, firmly tightened. If any screw remains, loosen, injuries may
View all Brother International PR-600II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
APPENDIX Insert the pad between the machine bed and 5 the ring of the cap frame driver. ■ Installing the needle plate spacer Attach the needle plate spacer to the needle plate. 1 1 Pad 2 Machine bed 3 Ring of the cap frame driver Lightly press down the ring, and then use the 6 Allen screwdriver (large) to tighten the four hexagonal screws on the inside of the ring. Firmly tighten the screws. 1 Needle plate spacer ■ Preparing the mounting jig Lower the stopper, and then attach the mounting jig to a stable surface, such as a desk. Use a Phillips screwdriver to loosen the two 1 screws, and then lower the stopper in the direction of the arrow. 1 Ring CAUTION ● Make sure that each hexagonal screw is firmly tightened. If any screw remains loosen, injuries may result. Remove the pad inserted in step 5. 7 1 Loosen the screw so that the stopper can be hooked onto the screw and clamped with it. 2 Loosen until the stopper moves. 3 Stopper 174