Brother International PR-600II Users Manual - English - Page 226

Patterns stored in the machine's memory cannot be recalled. The machine's memory may be damaged. Consult your nearest authorized dealer. The machine couldn't save the data. Try to use a different media. The machine was stopped while the needle bar case was moving. Touch to automatically reset the needle bar case. The pattern is larger than the embroidering area of the installed embroidery frame. Use an embroidery frame with an embroidering area that is larger than the pattern. Thread color that was specified is incorrect. The thread color number that was entered is not in the custom thread table setting. Check the number, and then try entering the number again. The USB media is write-protected. Cancel the write protection. The USB media is write-protected. Touch , and cancel the write protection. The USB media was attempted to change while it is being read. Please try again without disconnecting. was touched while no embroidery card is inserted. Insert an embroidery card. (Refer to page 112.) 7 A pattern on an embroidery card not compatible with this machine was being recalled. Some embroidery cards with copyrighted patterns cannot be used. Embroidery data with an incompatible version is being used. Embroidery data that is not complete or has an unknown version cannot be used. The pattern has too many stitches and cannot be used. Data with stitches that exceed specifications (500,000 stitches) cannot be displayed. Use data design software to reduce the number of stitches. Troubleshooting 209