Brother International PT-2200 Users Manual - English - Page 61

FRAME FUNCTION With the Frame function, you can choose from various frames and highlights to design a more decorative or emphasized label. The following Frame settings are available: OFF, SQUARE, ROUND, CANDY, POINTING, NAMEPLATE and DOT The default frame setting is OFF; however, other settings are also available. When any setting other than OFF is selected, the Undl/Frm indicator on the right side of the display lights up.  If the ON underline setting has already been chosen when a frame or highlight is selected, the underline setting changes back to OFF and the text is framed or highlighted. Refer to Reference at the end of this section for samples of the available settings. To change the frame setting: 1 While holding down current frame setting. Frame , press once, and keep held down to display the 2 While still holding down Frame , continue pressing until the desired frame setting is displayed.  The Undl/Frm indicator lights up when any setting other than OFF is selected. 3 Release to apply the selected frame setting to the entire text. EXAMPLE To select the CANDY frame setting: 1 While holding down Frame , press once, and keep held down. Alt F R A M E O F F Caps 2 While still holding down , con- Frame tinue pressing until CANDY is dis- played. Alt F R A M E Caps C A N D Y 3 Release . Length Undl/Frm Wide Length Undl/Frm Wide 57